iPowerline Technical Specification
Frequency Usage:
3 - 34 MHz configurable for 10, 20 or 30 MHz bandwidth.
Individual control of each carrier in 1dB steps.
Supports deep notching in passband for interference control and local EMC regulator compliance.
Individual control of each carrier in 1dB steps.
Supports deep notching in passband for interference control and local EMC regulator compliance.
Transmit Power Spectral Density:
59dBm/Hz
Minimum Recieve Level:
-70dB (no interference)
Dynamic Range:
90dB
Modulation:
OFDM with 1536 carriers
Bit loading per carrier adjusts in response to received SNR.
Bit loading per carrier adjusts in response to received SNR.
Typical Raw Throughout:
205 Mbit/s with 40dB attenuation @ 30MHz bandwidth.
Upstream and downstream time multiplexed.
Upstream and downstream time multiplexed.
Typical Application Throughput:
153 Mbit/s UDP with 40dB attenuation @ 30MHz bandwidth.
Networking
Interfaces:
1 x 10/100-Base T Ethernet
Bridging:
Internal IEEE 802.1d briding between Powerline and Ethernet.
Support for upto 64 MAC addresses.
Support for upto 64 MAC addresses.
Configuration:
Automatic using DHCP, TFTP and RADIUS.
Remote upgrade on demand.
Remote upgrade on demand.
Management:
Integral managment agent with support for SNMP v1, v2 and v3.
Security:
IEEE 802q VLAN
Proprietary VLAN
DES and 3DES encryption
Proprietary VLAN
DES and 3DES encryption
Physical & Environmental
Environmental:
Operating Temerature: 0°C - 40°C (no fan).
Humidity: 20-95% non-condensing
Humidity: 20-95% non-condensing
EMC:
Conforms to FCC part 15 limits
Carrier output can be adjusted to meet local limits
Carrier output can be adjusted to meet local limits
Power Supply:
100-240V AC 50/60Hz
Max Consumption 6.6W
Built-in Powerline Coupler
Max Consumption 6.6W
Built-in Powerline Coupler
Packaging:
Dimentions (mm): 67(w) x 125(h) x 40(d).
Environmental Rating IP20
Environmental Rating IP20
